How To Scrape And Paint Window Frames

Download Article

Download Article

Window frames provide a decorative and protective box effectually window panes. The frames are usually wooden, and painting them more often than not requires a bully amount of attention to detail. The goal of any pigment chore on window frames is to make your windows expect rejuvenated and fantastic while preventing messy mistakes. With a little bit of fourth dimension and care, yous'll have your window frame looking corking in no fourth dimension!

1. 1

   Put down a towel in front end of the window. This is but a precautionary measure to take hold of the old paint that falls to the ground once you start scraping it off. Having a towel down saves y'all a lot of time in the hereafter so you don't take to worry about vacuuming or extensive cleanup.^[one]

   • Use a towel that you don't heed getting dirty or ruined. If yous don't have a towel, employ any one-time slice of material.
   • You can also keep your drib-cloth in identify by sticking record on the ground by the edge of the wall and pressing the border of your fabric into the tape.
   • Information technology should be noted here that this process is the same whether your window frame is metal or wood. Withal, if your frame is metal, stripping the paint is even more of import in order to combat rust.^[two]

2. two

   Scrape the old paint off using a scraper or painter'southward multi-tool. Practice this past digging the edge of the tool into the pigment and so pushing down and forward into the window frame. Exist careful not to scratch the window pane here if you are getting near it.

   • When finished, the surface doesn't need to be completely gratuitous from all traces of paint, only the majority of it.^[three]
   • For smaller areas, use a small scraper which will be able to become into the corners and parts a large scraper cannot.

   Advertisement

3. three

   Fill in whatever holes created past nails with regular spackling putty. Spackle is substantially a putty that is used to fill in holes or imperfections. It so hardens and provides a neutral, flat surface to paint over. Use information technology by using a scraper and spreading it on sort of like butter.

   • Generally speaking, less is more with spackle as yous don't desire to put and so much on that it forms a mound. You lot can e'er utilise more later.
   • You can buy spackle very cheaply from any hardware shop.^[4]

4. 4

   Sand down the frame and patched areas using 240-grit sandpaper. Sanding the frame down has several benefits. The outset of these is that it actually helps the pigment stick meliorate when you somewhen apply the coat. Secondly, information technology creates a overnice even surface for y'all to piece of work on so you don't have to worry about finishing painting only to discover the frame is bumpy.

   • A good technique when sanding is to cup the sandpaper in your palm and gently rub the surface that you are working on. Long, smooth strokes work better than brusque, quick strokes.^[5]

5. v

   Brush debris off the frame. In one case you've scraped and sanded downwardly the surface, it's likely that at that place are plenty of little $.25 of debris withal clinging on to the frame. Getting rid of these is of import to make sure they don't interfere with your new coat of paint. Castor gently around the entire frame with a make clean paint brush to get rid of equally much debris as possible.

   • Exist sure to become into the corners every bit well every bit plenty of pieces of wood and pigment can often dodder up here.^[vi]

Advertizement

1. one

   Lay painter'south tape down around the outside of the frame. Do this by tracing the outline of the frame with the record to form a perimeter around it. This ensures that you volition get a clear and straight divide betwixt the coat of paint and either the wall or the window pane.^[7]

   • You should position the tape 0.two centimetres (0.079 in) from the edge of the frame to ensure the paint covers all of the frame.
   • If you don't have painter'southward tape, masking tape works fine as well. You can get this from any hardware store.^[8]
   • If you want to avoid painting the hinges of the doorframe, cover these as well.

2. 2

   Apply an oil-based primer using a 2 in (v.i cm) angle brush. Oil-based primers create a better bond between the pigment and the wood. It's okay to use a spray on primer but make sure that you work the spray into the wood using the castor as well

   • Apply the primer by using long flowing strokes with the castor on the area you are trying to cover.
   • Using an bending brush allows you to take easier admission to the corners and other hard to reach spots.^[9]
   • You only need to apply primer to surfaces that you scraped and smoothed. If you are merely putting on a new coat of paint, you don't need to worry about primer.

3. three

   Wait about iii hours for the primer to dry. The primer needs to be dry out for you to be able to paint over the meridian of it. If it is a particularly humid day, the primer may take a little fleck longer than this simply 3 hours should exist about correct.^[10]

4. four

   Apply your oil-based paint using a 2 in (five.ane cm) angle castor. Your frame is ready to be painted! Exercise your best not to get paint in places it shouldn't exist, just it's not the stop of the world if you practice. There's no need to skimp on the paint hither either so be generous. Go for long flowing strokes with your brush to become a smooth, even coat.

   • If you are painting a casement window, paint the frame first and stop with the sill. If you are painting a sash window, pigment the bottom frame first. Once it is dry to the touch, move the lesser frame up, motion the other frame down, and pigment the second one.^[11]
   • Keep your brush nice and loaded with paint throughout this process.
   • Feel free to transfer some paint from the large tin to a smaller container similar a yogurt or sour cream cup. This will brand dipping and treatment much easier.^[12]

5. 5

   Remove the painter's tape. When done correctly, at that place will be a solid clear line between the border of the pigment and the start of the other surface. Remove information technology gently at a 45-degree angle so you don't accidentally make any marks on the surface.^[thirteen]

   • If any paint happens to drip through later yous remove the tape, wipe it away immediately with a lightly dampened cloth.
   • If you lot leave the paint to dry and and so remove the tape, it can result in peeling.
   • If you plan on applying a second glaze, don't remove the tape.

6. six

   Permit the paint dry out over the course of 24 hours. Information technology takes up to 24 hours for paint to dry and so leave the paint alone during this time. Some paints will take less time, but 24 hours is a rubber estimate for an oil-based paint.

   • If y'all have a casement window, be careful non to let the pigment dry with the window closed as this volition make the various parts of the frame stick to each other.
   • One time the pigment is dry, feel free to apply a second coat of paint if y'all would adopt a thicker glaze.^[xiv]

Advertisement

Add New Question

• Question

  How do I gear up a window frame for painting?

  

  Jeff Baldwin is a Residential Painter and the Possessor of Baldwin Custom Painting. With 2 decades of painting experience, Jeff specializes in high-end residential and small commercial painting projects. Dedicated to quality craftsmanship, Jeff and Baldwin Custom Painting provide bonded/insured, licensed, and pb-safe certified services in residential painting, light commercial painting, and wood refinishing.

  

  Residential Painter

  Expert Answer

  Tape effectually the edges of the frame if you want to have a clean, smooth edge.

• Question

  What pigment is all-time for window frames?

  

  Jeff Baldwin is a Residential Painter and the Possessor of Baldwin Custom Painting. With 2 decades of painting experience, Jeff specializes in high-terminate residential and small commercial painting projects. Dedicated to quality craftsmanship, Jeff and Baldwin Custom Painting provide bonded/insured, licensed, and lead-safe certified services in residential painting, light commercial painting, and wood refinishing.

  

  Residential Painter

  Expert Answer

  Wait for a paint that'due south specifically meant for trim since information technology volition castor on easier and last longer.

Ask a Question

200 characters left

Include your e-mail accost to get a message when this question is answered.

Submit

Advertizing

• Use the all-time tools and paint that y'all can afford. When it comes to domicile improvement, you generally get what you pay for so be aware of unusually cheap products.

Advertising

• Always make sure the room you're working in is well ventilated and that yous wear a mask when working closely with pigment.

Advertisement

Things Yous'll Need

• Towel or other old material
• Painter'south record
• Oil-based pigment primer
• Spackle
• Oil-based pigment
• Paintbrush (ideally an angled castor or a sash brush)
• Paint scraper or razor blade

About This Article

Thanks to all authors for creating a page that has been read 63,912 times.

Did this commodity help yous?

Source: https://www.wikihow.com/Paint-a-Window-Frame

Posted by: ruffintheratur1988.blogspot.com

Share this post